CD-3 – Air-Powered, 3 Headed Scabbler 
Features:
- Delivers 1,200 hits per minute for fast surface removal
- Requires only 100 CFM at 100 PSI
- Heavy-duty 1/4" steel frame
- 2" Vacuum Port for dust-free operation
- Automatic in-line oiler
- WHIPCHEK Cable assures safe air hose hookup
Ideal for:
- Removing spalling concrete
- Roughening surfaces for new overlayments
- Reducing high spots
- Creating wheelchair access ramps
- Removing epoxy
- Creating slip-resistant surfaces
- Texturing parking garage ramps
- Removing loose or deteriorated concrete
Performance:
- 3 Scabbler heads remove 3/16" of concrete per pass
Accessory Information below
| Model |
SKU |
Power Options |
Weight |
Length |
Width |
Height |
| CD-3 |
63200 |
Air-Powered |
165 lb |
39" (99 cm) |
22" (56 cm) |
38" (97 cm) |
|
CD-5 – Air-Powered, 5 Headed Scabbler 
Features:
- Delivers 1,200 hits per minute for fast surface removal
- Requires only 160 CFM at 100 PSI
- Heavy-duty 1/4" steel frame
- Wide T-Grip Handle and 8" wheels for superior balance and handling
- 3" Vacuum Port for dust-free operation
- Automatic in-line oiler
- WHIPCHEK Cable assures safe air hose hookup
Ideal for:
- Removing spalling concrete
- Roughening surfaces for new overlayments
- Reducing high spots
- Creating wheelchair access ramps
- Removing epoxy
- Creating slip-resistant surfaces
- Texturing parking garage ramps
- Removing loose or deteriorated concrete
Performance:
- 5 Scabbler heads provide 11 1/2" working width – Remove up to 250 square feet of concrete per hour
Accessory Information below
| Model |
SKU |
Power Options |
Weight |
Length |
Width |
Height |
| CD-5 |
63100 |
Air-Powered |
300 lbs |
44" (112 cm) |
N/A |
40" (102 cm) |
|
Scabbler Accessories
 5-Point Bit
The 5-Point Bit penetrates the surface up to 1/4" per pass and leaves a rough texture.
Ideal for
- Breaking up blistered or spalling concrete
- Removing floor coatings
- Roughening the surface to create a bond for repairs or overlays
- General Surface Removal
9-Point Bit
The 9-Point Bit penetrates the surface up to 1/8" per pass and leaves a medium texture.
Ideal for
- Creating excellent bonding texture for thin overlays of polymer concrete, epoxy or urethane
- Leveling uneven joints
Surface removal for repairing spalled and deteriorated slabs
Scabbler Bit Removal Tool
This bit removal slide hammer will assist you in removing your old bits from either Scabbler.
|
|
