Dyma Serts
Dyma Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings.
Dyma-Serts grind 5 times faster than grinding stones and last longer - up to 30,000 square feet (2,800 sq. m.) of grinding action. Dyma-Serts can be used for wet or dry grinding.
Ideal for:
- Smoothing rough surfaces or trowel marks
- Grinding or polishing terrazo
- Repairing surface damage to concrete slabs
- Removing urethane or epoxy thincoats
- Grinding sharp aggregates such as flint and granite
- Removing surface imperfections from epoxy mortars
- Leveling high spots
- Removing thin mastics and thin-set
|
Strip-Serts
Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete.
Strip-Serts have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.
Ideal for:
- Removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups
|
Grinding Stones
Grinding Stones have various grits for course or fine polishing.
Ideal for:
- Removing trowel marks
- Removing rain spots
- Leveling high joints less than 1/16" high
- Removing excess concrete
- Smoothing rough finishes
- Grinding and polishing terrazzo and marble
|
Scarifier Assemblies
Steel Cutters
Scarifier Assemblies are high carbon steel cutter assemblies in steel cases.
- Standard cutters last 3 to 6 hours
- Heavy-duty cutters last 8 to 12 hours
Ideal for
- Breaking up hard surfaced deposits of oil-dri, fiberglass, grout or plaster
- Removing concrete buildup
- Leveling brick or wood block floors
- Initial grinding of rough, broom-finished concrete
- Preparing surfaces for overlayments
- Tile floors
- Texturing slippery floors
CP 204-P #20236
1 5/8" O.D. x 1/2" ID x 1/8"
18 pointed steel cutter used for light scarifying and surface cleaning.
 JRS-501P #12206
2" O.D. x 17/32" ID x 3/16"
18 pointed steel cutter used on heavy duty scarifier.
|
Wire Brushes
Wire Brushes are flat steel strips mounted in wooden blocks.
Ideal for:
- Removing deposits of grease, wax, ink or food products
- Breaking up rubber-backed carpeting
|
Surfacer Disc Assembly
The Surfacer Disc assembly is easily assembled for heavy-duty surface build-up removal. The cutter wheels can be positioned to meet removal needs.
Ideal for
- Removal of industrial build-ups, tar, rubber, fiberglass, grout or plaster
- Roughening concrete
- Grinding asphalt
|
Silabide Pads
Silibide Pads are ideal for scrubbing:
- Concrete
- Stone
- Metal
- Brick
- Wood
- Tile floors
|
