Fort Payne Hardware Co. stocks and is expert at the application of industrial lubricants. We are distributors for two of the finest lubricant manufacturers. Call us for recommendations for your application. Oils, Greases, Synthetics..... 888-733-0073

Royal Purple® produces a wide range of high performance lubricants for nearly every industrial application. Because Royal Purple's sole focus is to create state-of-the-art lubricants—unlike most oil companies that primarily focus on fuel—its industry experts develop products that significantly outperform other synthetic or mineral-based oils in laboratory settings and more importantly, in the field.

Air Hammer

Air Hammer Oil Premium Rock Drill Oil, with Synslide®. An ultra-tough, para-synthetic rock drill / air hammer oil designed to increase the life of air hammers and rock drills.

Bearings

Synfilm® Synthetic air compressor and industrial oil, with Synerlec®. Royal Purple's best-selling industrial lubricant and is recommended for use in air compressors, pumps, bearings, gears, air tools, etc.

Parafilm® Compressor, pump, turbine and general plant lubricant, with Synerlec®. Suggest use use in air compressors, pumps, turbines, bearings and general plant equipment where premium performance is desired but the use of a fully synthetic oil is not a viable option.

Chains

Max-Chain® Dry film / EP lubricant, with Synerlec®. Recommended for chains and open gears operating in dusty environments.

Compressor, Centrifugal Air

Synfilm® GT Multi-purpose industrial oil, with Synerlec®. Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm®.

Compressor, Process Gas

NGL-NS™ Hydrocarbon gas compressor oil. A premium, synthetic lubricant specifically designed to increase the service life of reciprocating gas compressors in hydrocarbon service where sulfur-sensitive catalysts are present downstream of the compressor.

Synfilm® NGL Hydrocarbon gas compressor oil, with Synerlec®. A long life, high film strength, synthetic lubricant specifically designed to increase the service life of rotary screw, centrifugal, rotary vane and reciprocating gas compressors in hydrocarbon service.

Compressor, Reciprocating Air

Synfilm® Recip. Reciprocating air compressor oil, with Synerlec®. A long life, high film strength, energy efficient, synthetic lubricant that excels in the lubrication of reciprocating air compressors.

Compressor, Rotary Screw Air

Acilube™ Synthetic lubricant for acid gas service. Provides extra corrosion protection to metal surfaces subjected to acidic gases and minimizes their detrimental effect on the oil.

Synfilm® Synthetic air compressor and industrial oil, with Synerlec®. Royal Purple's best-selling industrial lubricant and is recommended for use in air compressors, pumps, bearings, gears, air tools, etc.

Parafilm® Compressor, pump, turbine and general plant lubricant, with Synerlec®. Recommended for use in air compressors, pumps, turbines, bearings and general plant equipment where premium performance is desired but the use of a fully synthetic oil is not a viable option.

Uni-Chem™ An inert, ashless, multi-synthetic lubricant, which is chemically stable and free of impurities found in other mineral and synthetic oils. Recommended for use with inert / reducing gases ( such as nitrogen, hydrogen, helium, carbon monoxide, natural gas, methane, ethane, propane, butane, ethylene, etc.).

Compressor, Vane Air

Acilube™™ Synthetic lubricant for acid gas service. Provides extra corrosion protection to metal surfaces subjected to acidic gases and minimizes their detrimental effect on the oil.

Synfilm® GT Multi-purpose industrial oil, with Synerlec®. Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm®.

Parafilm® Compressor, pump, turbine and general plant lubricant, with Synerlec®. Recommended for use in air compressors, pumps, turbines, bearings and general plant equipment where premium performance is desired but the use of a fully synthetic oil is not a viable option.

Uni-Chem™ An inert, ashless, multi-synthetic lubricant, which is chemically stable and free of impurities found in other mineral and synthetic oils. Recommended for use with inert / reducing gases ( such as nitrogen, hydrogen, helium, carbon monoxide, natural gas, methane, ethane, propane, butane, ethylene, etc.).

Compressor Lubricant, Refrigeration

Uni-Temp™ Synthetic refrigeration oil, with Synerlec®. A long life, high film strength, refrigeration lubricant that provides superior performance in both rotary screw and reciprocating refrigeration compressors.

Cylinder Lubricant

CAP™ Cylinder and packing gland lubricant, with Synerlec®. Recommended for use in reciprocating compressors that compress inert gases such as hydrogen, nitrogen, ethylene, carbon dioxide, methane, ethane, butane, propane, propylene, helium, LPG, etc. Cap™ is commonly used in gas reinjection compressors.

Thermyl-Glyde® Severe service gear and bearing oil, with Synslide®. Has all of the advantages of Synergy® but is recommended where heavy loads, shock loads, low operating speeds and / or high operating temperatures are encountered.

Food Grade Lubricant

Poly-Guard® FDA High performance FDA / USDA H-1 oil, with Purolec®. Recommended for use in compressors, pumps, gear boxes, bearings, blowers or almost any other equipment in food processing or pharmaceutical plants requiring oil.

Flushing Lubricant

Royal Flush Oil circulation system cleaner. A safe, effective and inexpensive product for cleaning sludge and varnish from equipment while in service.

Heat Transfer Oil

Hy-Therm™ 707 A synthetic, heat transfer fluid with a thermal conductivity 50 to 100 percent greater than many widely used heat transfer fluids. Systems remain cleaner and its low temperature fluidity eliminates the need to drain fluid during cold weather shutdowns.

Mechanical Seal Barrier Fluid

Barrier Fluid FDA® Buffer / barrier fluid for mechanical seals. A pure, non-reactive, synthetic fluid that provides superior lubrication and cooling for double and tandem mechanical seals.

Barrier Fluid GT® Buffer / barrier fluid for double and tandem mechanical seals. Recommended for use at elevated temperatures where a nitrogen purge is not an option and when FDA purity is not required.

Mist Oils

Synmist® Air mist lubricant, with Synerlec®. A high film strength, synthetic lubricant specifically designed for use in centralized air-mist lubrication systems.

Paper Machines

Para-Syn® / PM Para-synthetic paper machine oil, with Synerlec®. A premium oil designed to eliminate bearing wear and high temperature deposits that are consistently troublesome to paper machines.

Penetrating Aerosol

Maxfilm™ Multi-purpose aerosol lubricant / penetrant / preservative, with Synerlec®. A high film strength, multi-purpose, synthetic lubricant / penetrant that excels in plantwide maintenance-related applications.

Pumps

Acilube™ Synthetic lubricant for acid gas service. Provides extra corrosion protection to metal surfaces subjected to acidic gases and minimizes their detrimental effect on the oil.

Parafilm® Compressor, pump, turbine and general plant lubricant, with Synerlec®. Recommended for use in air compressors, pumps, turbines, bearings and general plant equipment where premium performance is desired but the use of a fully synthetic oil is not a viable option.

Synfilm® Synthetic air compressor and industrial oil, with Synerlec®. Royal Purple's best-selling industrial lubricant and is recommended for use in air compressors, pumps, bearings, gears, air tools, etc.

Synfilm® GT Multi-purpose industrial oil, with Synerlec®. Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm®.

Rust Preventative

VP Preservative Oil 10 Vapor phase corrosion inhibitor. Recommended for use to prevent rust and corrosion in engines, gearboxes and other closed systems that will be stored for periods up to one year or more.

Sewing Machine Needles

Needle Oil Synthetic industrial oil, with Synerlec®. A high-performance lubricant for industrial applications such as high speed spindles and die grinders.

Solvent

MaxSolv Super-solvent metallic cleaner. An effective non-corrosive, chemical solvent that offers maintenance personnel the unique opportunity to clean dirty equipment while in operation. This is possible because MaxSolv's high thermal stability allows it to be added directly to the lubricating oil immediately prior to changing.

Spindle Lubricant

Synfilm® GT Multi-purpose industrial oil, with Synerlec®. Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm®.

Needle Oil Synthetic industrial oil, with Synerlec®. A high-performance lubricant for industrial applications such as high speed spindles and die grinders.

Steam Cylinder Lubricant

Thermyl-Glyde® Severe service gear and bearing oil, with Synslide®. Has all of the advantages of Synergy® but is recommended where heavy loads, shock loads, low operating speeds and / or high operating temperatures are encountered.

Turbines, Gas / Steam

Synfilm® GT Multi-purpose industrial oil, with Synerlec®. Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm®.

Synfilm® GTO Gas turbine oil. Recommended for the lubrication of gas turbines where unique operating conditions exist or where Original Equipment Manufacturer warrranties require the use of non-EP oils. Approved by Solar Turbines.

Vacuum Pumps

Acivac™ Synthetic lubricant for acid gas service. Minimizes the effects of acids on the oil, which greatly extends both the life of the oil and the pumps.

Synfilm® GT Multi-purpose industrial oil, with Synerlec®. Recommended for use in gas and steam turbines, blowers and vacuum pumps, bearings, gears, air tools, etc. Synfilm® GT should be considered instead of Synfilm® when: oil reservoir temperatures exceed 200° F, improved low temperature fluidity is desired or when a viscosity grade is not available in Synfilm®.

Way Lubricant

Synway™ Slide and way lubricant, with Synslide®. An ultra-tough, tenacious lubricant designed to effectively lubricate machine tool slides and ways.

Wire Rope Lubricants

Wire Rope Lubricant Wire rope lubricant, with Synslide®. Contains specially formulated synthetic lubricants, penetrants and synthetic additives that significantly extend the service life of wire ropes over a wide range of temperatures and working conditions common to the mining, marine and construction industries.